Your Website Name
Stainless Steel L and T Shape Corner Brackets
These stainless steel L-shaped and T-shaped corner brackets reinforce 90-degree joints and flat connections in furniture, cabinets, shelves and light frame assemblies. The brushed silver surface, rounded corners and countersunk mounting holes create a clean finish after installation.
Choose from four L-type sizes and four T-type sizes. The 1.0 mm stainless steel plate offers corrosion resistance for indoor furniture, storage systems, workshops and commercial interiors.
Key Features
- Two connection styles: L brackets reinforce right-angle corners, while T brackets join intersecting flat members.
- Stainless steel construction: resists moisture and everyday corrosion.
- Countersunk mounting holes: allow compatible screw heads to sit close to the bracket surface.
- Rounded edges: improve handling and give installed assemblies a neat appearance.
- Multiple sizes: 40 mm, 50 mm, 60 mm and 80 mm options support different furniture and frame dimensions.
General Specifications
| Item | Specification |
|---|---|
| Product type | L-shaped and T-shaped corner reinforcement brackets |
| Material | Stainless steel |
| Plate thickness | 1.0 mm |
| Connection angle | 90 degrees for L-type brackets |
| Surface finish | Brushed silver |
| Mounting holes | Pre-punched countersunk holes |
| Installation | Screw fixing; select screws for the base material |
| Typical use | Furniture, cabinets, shelves, tables, frames and repair work |
Size Options
| Bracket Type | Nominal Size | Thickness |
|---|---|---|
| T-Type | 40 x 40 x 12 mm | 1.0 mm |
| T-Type | 50 x 50 x 14 mm | 1.0 mm |
| T-Type | 60 x 60 x 15 mm | 1.0 mm |
| T-Type | 80 x 80 x 15.5 mm | 1.0 mm |
| L-Type | 40 x 40 x 14 mm | 1.0 mm |
| L-Type | 50 x 50 x 14 mm | 1.0 mm |
| L-Type | 60 x 60 x 15 mm | 1.0 mm |
| L-Type | 80 x 80 x 15 mm | 1.0 mm |
L-Type and T-Type Dimension Charts
Product Details
Selection Guide
| Requirement | Recommended Option |
|---|---|
| Reinforce an inside 90-degree corner | Choose an L-type bracket. |
| Join a center member to a cross member | Choose a T-type bracket. |
| Compact cabinet or small furniture joint | Start with a 40 mm or 50 mm size. |
| Wider shelf, table or frame member | Consider a 60 mm or 80 mm size. |
| Visible installation | Use matching countersunk screws for a cleaner surface. |
Installation Notes
- Confirm the bracket shape and nominal size for the joint.
- Position the bracket and mark every mounting hole.
- Pre-drill the base material when needed to reduce splitting or misalignment.
- Fasten the screws gradually and check that the joint stays square.
Request a Quote
Send the required L-type or T-type size, quantity, screw requirements and application details. We will help confirm the suitable bracket option for your project.
